|
Addonics Drive Duplicator |
 |
 |
 |
|
Written by Administrator
|
|
Sunday, 31 May 2009 11:24 |
|
The Addonics HDD duplicator is a convenient and easy to use one to one hard drive duplicator that makes coping any 3.5" SATA hard drive to another 3.5" SATA hard drive fast and easy. There is no computer needed or complex software to purchase or operate. Just open the doors on the two drive bays, load your master hard drive to the drive bay on top and another hard drive of capacity equal or larger than the master drive to the bottom drive bay, lock the drive door and push the start button to start the copying process. |
|
Last Updated on Sunday, 31 May 2009 11:43 |
|
|
Addonics External eSATA Port Multiplier |
|
|
|
|
Written by Administrator
|
|
Thursday, 09 April 2009 09:55 |
|
Addonics have released their 5x1 Serial ATA External Port Multiplier (EPM) which allows
users to connect 5 eSATA hard drives to a single port on a PM compatible host controller. 
The EPM is independant of the operating
system and only requires that the host
controller is Port Multiplier enabled - such
as the Addonics range. The 5 external hard drives can be
configured as RAID 0, 1, 5, 10 or combined
as 1 large volume or to appear as 5
individual drives to the system. When used
in conjunction with one of the Addonics
4-port eSATA controller, up to 20 hard
drives can be instantly attached to your
system externally using 4 EPMs. |
|
Last Updated on Thursday, 09 April 2009 10:10 |
|
Written by Administrator
|
|
Monday, 15 December 2008 10:07 |
|
The Addonics NAS Adapter is a convenient and economical solution for adding any USB storage device onto your LAN (Local Area Network). Once on the network, the USB
storage can be shared by any network user, just like an ordinary NAS device. When used in conjunction with the Addonics Storage Towers or Storage Racks, a Multi-Tera byte storage solution with various RAID capabilities can be instantly added to the LAN.  For remote users who are not connected
over the LAN, the NAS Adapter provides
FTP access for up to 8 simultaneous users
anywhere in the world with an internet
connection. In addition, the NAS adapter
can also be used as a print server or as a
Bit-Torrent downloading appliance.
Comes with a USB 2.0 connection and a
fast Ethernet 10/100Mbps connection.
The NAS adapter supports both SMB
(Server Message Block) and the open
source Samba network protocols, allowing
for cross-platform access of all shared data
for most versions of Windows, Mac OS X,
and various Linux distributions. |
|
Last Updated on Thursday, 09 April 2009 12:08 |
|
Addonics Hardware SATA PM |
|
|
|
|
Written by Administrator
|
|
Wednesday, 03 December 2008 22:37 |
|
Addonics have made available a newer vserion of the Serial ATA Hardware Port Multiplier (HPM) interface. A Port Multiplier allows you to interface up to 5 Serial ATA drives over 1 x SATA cable to your host controller. 
A standard Port Multiplier allows you to configure a RAID system of up to 5 drives connected to a SATA controller that is Port Multiplier enabled. The HPM is a little different, using a controller that is PM enabled, once the RAID is configured - then the RAID array can be attached to any Serial ATA controller whether it is PM enabled or not. The HPM is an option with the Addonics Storage Towers, or can be purchased as just a module to allow users to build their own external drive systems. |
|
|
